Leckey BeMe Скачать руководство пользователя страница 19

Страница: 19 / 128

Leckey BeMe User Manual

p19

Warning:

Only use the tilt-in-

space feature on level ground.

If the tilt-in-space is used with

high seat positions, then there

is a risk of the seating system

becoming unstable when

parked on a sloping surface.

The tilt-in-space can be angled

while the user is in the seat.

Before you adjust the tilt-in-

space angle of the seat, always

ensure the pelvic belt is secured

preventing the user from sliding

forward in the seat.

SECTION 9.9:

TILT IN SPACE – SMALL

HIGH-LOW CHASSIS

Always keep the tilt-in-space lever in the

locked position to prevent accidental

actuation of the lever which could cause the

seat unit to jolt and possibly cause injury to

the child.
Please use the handle bars when operating

tilt-in-space.
Always check with your therapist that the use

of tilt-in-space will not cause any obstructions

to the child’s airways.

To unlock the tilt, pull out and twist the locking

. Press the lever to operate the tilt

Always make sure you are holding the seat or

push handle to prevent sudden movement.

You must ensure you are

holding the push handle with

one hand while operating

the tilt- in-space, to prevent

the user from jerking forward.

Warning:

Содержание BeMe

































































































































Результаты поиска

Содержание BeMe

Отзывы:

Бренды по названию

Популярные бренды

Leckey BeMe, Руководство пользователя

Результаты поиска

Содержание BeMe

Отзывы:

Бренды по названию

Популярные бренды