Lechler XactClean HP+, Инструкция по техническому обслуживанию

Страница: 18 / 21

18
ASSEMBLY OF SPRAY HEAD WITH HOUSING
„
The position of the pin is indicated by a
permanent marker on the outside of the
housing.
„
Mark the position of the grooves with a
permanent marker on the outside of the
spray head spindle on the bearing unit.
„
The two markings serve to position the
bearing unit and the housing in which the
gear unit is located.
„
The thread of the bearing unit is screwed
into the housing. The markings must be
held in position during screwing.
37a 37b
37c 37d
There are two methods for mounting the bearing unit with the housing.
Method A