Lechler XactClean HP, Инструкция по обслуживанию

Страница: 8 / 17

8
CORRECT INSPECTION
„
To check the function of the gear unit,
turn the output shaft while holding the
gear unit housing. It is normal for the
rotation to be stagnant. However, the
spindle should be rotatable.
„
Rotate the beige colored part while hol-
ding the blue one to check the function of
the turbine. The rotation should be smoo-
th with minimal friction. There should be
very little play in the turbine head.
„
If the turbine cannot be turned by hand
easily or if there is strong wear and tear
of the turbine, it must be replaced.
„
The second and more reliable way to
check whether the gearbox is working
is to insert the turbine unit‘s gear into
the gearbox. The next step is to turn the
spindle of the turbine unit for a few re-
volutions. This should work with minimal
effort and rotate without much effort and
friction.
„
If it cannot be turned by hand, small
particles, e.g. sand, may have accumu-
lated between the gears. These can be
removed by soaking and rinsing or by
means of an ultrasonic bath. Do not use
excessive force, as this may destroy the
gear unit.
„
If the gearbox cannot be turned by hand,
it must be replaced.
17
18
19