Lechler XactClean HP, Инструкция по обслуживанию

Страница: 14 / 17

14
REASSEMBLY
„
Mark the position of the pin with a
permanent marker on the outside of the
housing.
„
Mark the position of the grooves with a
permanent marker on the outside of the
spray head spindle of the bearing unit.
„
The two markings are used to position
the bearing unit and the housing in which
the gear unit is located.
„
The thread of the bearing unit is screwed
into the housing. The markings must be
held in position during screwing.
Continue with step 35 on page 16
33a
33b
33c 33d
There are two ways in which the bearing unit can be assembled with the housing.
Method A