GB/IE
Instruction for use
Connection to the electricity supply
Your appliance is designed to operate at a
voltage of 220 – 240V ~ 50 Hz. Before plugging
in the appliance, please ensure that the
electrical supply matches that of the appliance.
This information is detailed on the data badge
inside the fridge compartment. To view remove
the crisper at the bottom of the compartment.
•
The electric installation must comply with
local regulations.
•
This appliance must be earthed.
The manufacturer has no responsibility for
any damages caused to persons, animals or
destruction of goods, caused by failure to
follow these instructions.
•
The appliance is fitted with a supply cord
and a 13 amp 3 pin plug. If the plug is not
the same type as the socket, please follow
the instructions for replacing the plug later
in this handbook.
•
It is advisable not to plug in the appliance
to the mains by means of an extension lead
or adapter.
•
Please ensure that the supply cord is not
trapped or damaged by the appliance, or
any surrounding furniture.
Disconnection from the electrical
supply
Please ensure that the plug socket is
accessible after installation of the appliance.
Appliance description
(Fig 1)
1 - Signalling, display and adjustment control
panel
2 - Lamp for inside lighting
3 - Fan
4 - Adjustable Cabinet shelves
5 - Wine bottles support
6 - Defrost water collection channel – Drain tube
7 - Crisper cover
8 - Crispers
9 - Ice tray support and ice tray
10 - Fast Freeze compartment
11 - Freezer drawers
12 - Adjustable front feet
13 - Dairy shelf
14 - Door shelf
15 - Bottle shelf
Operation
Before the first operation, clean the inside of
the appliance (read the chapter „Appliance
maintenance and cleaning").
After finishing this operation, plug in the
appliance, open the door of the refrigerator
(the internal lamp will switch on) and set
temperature to an average position 4 or 5.
When the cabinet is first switched on or after a
power interruption the self test is initiated,
what this means is that all the components
are tested one-by-one. After the self test has
finished, the components (compressor,
heaters, fans) are started according to the
previous settings. Please be aware that this
will not happen straight away.
Let the appliance operate for about 12 hours
without putting food inside in order to allow it
to achieve the selected temperature.
The freezing of fresh food is possible after a
minimum of 12 hours of operation.
10
Содержание TF6096W
Страница 1: ...USER GUIDE TF6096W 60cm Fridge Freezer ...
Страница 5: ...Getting To Know Your Appliance Fig 1 4 ...
Страница 6: ...General Installation Maintenance Fig 3 Fig 9 Fig 5 Fig 6 Fig 7 Fig 8 Fig 10 Fig 4 Fig 2 5 ...
Страница 7: ...Fig 11 6 ...
