Lec Club LE, Руководство пользователя

Страница: 15 / 24

13
SECTION 4: CARE & MAINTENANCE
Tub Cleaning Guide
Cleaning After Each Client & End of Day
1. Drain the tub of all water.
2. Firmly pull the jet assembly away from the tub to remove. (Fig. 1)
3. Rotate the cover to unlock and separate the cover, magnetic impeller, and housing. (See
Fig. 2 to show how to unlock, See previous page for image identifying jet assembly parts.)
4. Place jet cover, impeller, and housing into a sink. Use a non-abrasive liquid soap and a
clean brush to remove any visible residue. Rinse with fresh water, and dry with a clean
paper towel.
5. Reassemble the jet assembly and reattach to the tub.
6. Fill basin with warm water and add the correct amount of an EPA-registered liquid
disinfectant (Splish Splash strongly recommended). Turn on the jet to circulate the water
for at least 10 minutes, scrubbing all visible residue from the inside walls of the basin with
a sponge/soft brush. NOTE: Brushes must be cleaned/disinfected after each use.
7. Drain the basin, rinse with fresh water, and wipe dry with a clean paper towel.
Fig. 1 Fig. 2
Cleaning Every Other Week
1. Fill tub with water and one-third (1/3) cup of 5.25% chlorine bleach for each one (1)
gallon of water. (An alternative to bleach would be an EPA-registered disinfectant with
demonstrated bactericidal, fungicidal, and virucidal activity.)
2. Turn on the jets to circulate the solution for 5-10 minutes and then sit for 6-10 hours.
3. Drain the basin, rinse well with fresh water, and wipe dry with a clean paper towel.