Lec Club LE, Руководство пользователя

Страница: 14 / 24

SECTION 4: CARE & MAINTENANCE
Tub Cleaning Guide
Always refer to your state and local codes for specific cleaning requirements.
NEVER USE abrasive cleaners on any surface area. Failure to comply can
cause damage and void your warranty.
The removable jet assembly MUST be placed into the motor housing in the correct order and
position or the jet may be damaged. This will NOT be covered by any Living Earth Crafts war-
ranty. Never turn the jet on without adequate water in the basin. There must be at least one
(1) inch of water above the motor housing.
Recommended Cleaning and Disinfecting Products
Your state board requires disinfecting of your pedicure basin. Living Earth Crafts recommends
“Splish Splash One-Step Disinfectant.”
While other EPA registered products are available for maintaining pedicure tubs, we have found
Splish Splash to be the most effective, multi-purpose and economical product on the market.
Products NOT Recommended
• Silicate based bath additives/scrubs - may void warranty.
• Oil-based products.
• High foam agents (use only low foam solutions).
• Abrasive cleaners that might damage the system components, and scratch/dull the basin
surface (major scratches will require professional refinishing.
• To avoid discoloration, products with petroleum distillates must not remain on surfaces.
Jet System Components
Jet Housing
Jet Cover
Magnetic Impeller
12
Tub Liners
Tub liners may be used with this system - it must sit between the housing and the impeller.