LeapFrog LeapStart Go, Руководство пользователя

Страница: 6 / 15

Power Light Indication
The
Power Light
on the LeapStart ® Go system has different behaviors
in the circumstances below:
Circumstance Power Light Behavior
System On Green
Charging Status* Amber
Charging Status
(when connected to LeapFrog
®
Connect)
Red and amber flashing in
about 1 second intervals
Charging Complete Green
Charging Complete
(when connected to LeapFrog
®
Connect)
Green flashing in about 1
second intervals
Bad Unit Green, red or amber lights
flashing rapidly
* If there is an issue charging the battery, such as the battery not getting enough power or being
outside of the normal temperature range, the power light will show green.
Instructions for Care and Use
For indoor, dry-location use only. Do not use the product near a sink or other wet
locations. Take care not to spill food or any kind of liquid on this product as it may
render it inoperable and not serviceable. In case the unit does get wet, unplug all
cables and turn it
OFF . Allow to dry thoroughly before reusing. Do not attempt to dry
with a hair dryer or other heat source.
Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in
places with temperatures ranging from 5°C (40°F) to 38°C (100°F). Do not leave the
product in your car as the temperatures in parked cars can exceed the
acceptable storage temperature. Exposure to extreme temperatures can result in
shortened battery life or cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid
dropping and never disassemble, crush, puncture, microwave, incinerate, insert
foreign objects or paint the product. Clean your hands before handling the product if
they have been exposed to suntan lotions or other chemicals.
Cleaning.
Disconnect all cords before cleaning. Clean the product with a slightly
damp cloth (cold water). Do not use soap, detergent or other chemicals. Never
submerge the unit in water. Allow to dry thoroughly before using again.
Repairing or Modifying LeapStart
®
Go System
Never attempt to repair or modify as the LeapStart
®
Go System does not contain any
user-serviceable parts. Service should only be provided by LeapFrog ® Enterprise, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe
impact or fall, immediately remove this product from use and contact LeapFrog
®
Consumer Services.
For service information, go to: www.leapfrog.com/support
605900 IM_0427.indd 6 05/09/2019 09:30:34