18
19
Pair the Protect by LeakSmart to the Hub 3.0
Pair the Protect by LeakSmart to the Hub 3.0
Tap
Next
in the LeakSmart app to initialize a three-minute
pairing mode.
• A green light on top of the hub indicates that it’s in pairing
mode.
• A blue light on top of the hub indicates that the three-
minute pairing mode has ended.
A double blue light on the valve control head indicates that it’s
ready to be paired.
Tap
Next
in the LeakSmart app.
Press and release the center button on the valve control head
to pair it to the hub.
When the valve control head rapidly flashes blue, or all the
lights turn off, you’ve successfully paired it to the hub.
• Verify that the valve appears in the app before moving on.
1
2
3
4
5
Note:
The valve may take up to one minute to pair and
populate in the app. If the valve fails to pair, push the
center button 5 times to reset it and try again.
Green light:
pairing mode is active.
Blue light:
pairing mode has ended.
Rapid blue
light/no lights:
successfully
paired.
Center button:
press and
release to pair to the hub.
Double blue light:
pairing mode is active.
1
4
5
2
Y88501PM Protect Shutoff vlv Manual_REV 9.2021.indd 18-19
Y88501PM Protect Shutoff vlv Manual_REV 9.2021.indd 18-19
9/2/21 10:20 AM
9/2/21 10:20 AM
