16
17
Peel the adhesive cover that states: ”apply this side to
sensor” from the pad or magnet and apply it to the back
of the sensor dock.
• For walls or other non-metal surfaces:
Peel the adhesive cover from the side of the pad that
to the wall.
• For metal surfaces:
Simply place the sensor dock with applied magnet to a
metal surface.
SensXtend Sensor Dock Adhesive Pad and Magnet Mount Instructions
Once the sensor dock is in place, slide the LeakSmart
of the sensor and aligning them with the pins on the
sensor dock. Firmly press into place.
Plug the extension cable or rope sensor cable into any of
the 3 ports on the sensor dock.
SensXtend Sensor Placement, Extension Cable and Rope Sensor Assembly
Align gold pins
on sensor with
pins on sensor
dock.
1
1
1
2
1
Note:
The extension cable is optional; the rope sensor will
detect leaks without the extension cable as needed. Do
not allow the rope sensor to cross over onto itself. This will
create a false positive where the sensor will think it has
detected a leak when no actual leak is there.
