Noisefoc
v1.1
Building Instructions
Thank you for purchasing this DIY module!
Building DIY kits happens on your own risk and we
cannot give any support. Please make sure you read this building instructions and the user manual
enirely before you start, which both are part of the module and can be downloaded via Exploding Shed.
Also make sure that your skills meet the difculty of the DIY kit and you have a basic knowledge about
soldering. Watch soldering tutorials and download the manuals here:
Noisefoc
is a
chaos oszillator
/ CV source
for the
Eurorack moduar system
.
DIY Level: Easy.
A successful assembly is only possible if you have some basic DIY skills, experience
and good tools. The success is based on your skills, besides our workshops we don‘t ofer any support.
The DIY kit can be assembled by halfway experienced DIYers in about 1-3h. All bags with parts are
labelled very well, you fnd all needed info there and on the silkscreen print on the PCB. Stuf like
polarity of parts etc, all is noted there.
Needed tools:
Good soldering iron (min 75W), solder, de-soldering pump, wirecutter, fat-nosed pliers,
wirestripper, much light, maybe a multimeter. Recommendations for good tools you can fnd here
and we also sell some tools there (EU only).
Completeness:
Despite all care it might happen from time to time, that a part is missing or wrong,
because we assemble our kits by hand. In such a case please contact [email protected] or Exploding
Shed and we will fnd a solution.
Power:
Like all Eurorack modules, the he Noisefoc is designed to operate on a symmetrical DC voltage
of +/- 12V. As it actually only needs positive supply, it runs on +12V DC or also 9V DC battery if you build
yourself such an adapter cable.
Connectors and Controls:
Controls:
Connectors:
Skull (Power Starving)
Pitch infuence input
Frequency A (OSC-String 1)
Resistor summed output
Frequency B (OSC-String 2)
Diode summed output
OSC 3 Fix/Light-Control Switch
1
