NOTE:
4.2.1 To prevent theft of the device, it should be installed as covertly as possible. Covertly
installation is suggested.
4.2.2 Avoid placing the device close to higher power electrical devices, such as reversing
radar, anti-theft device or other vehicle communication equipment;
4.2.3The device should be fixed into position with cable ties or wide double-side tape.
4.2.4 The device has built-in GSM antenna and GPA antenna. During installation, please
make sure the receiving side face is up, with no metal object above the device to interfere
with GPS reception. The following places are suggested for installation: shelter in the
decorated board below the front windshield; shelter around the front instrument panel
(non-metallic material face); in the decorated board below back windshield;
Notice:
If the windshield is pasted with metal thermal-protective coating or heating coating. It
may affect the receiving signal. In this case, please change the installation place.
