ENGLISH
> Stay alert and watch what you are doing.
> Do not operate the unit when fatigued or under
the influence of drugs or alcohol.
> Read all instructions and safety precautions for
equipmen t and spray material before operating
any equipment.
> Hearing protection is recommended for extended
use.
This tool is double insulated; therefore no
earth wire is required. Always check that the power
supply corresponds to the voltage on the rating plate.
> If the supply cord is damaged, it must be replaced
by the manufacturer or an authorised Service
Centre in order to avoid a hazard.
> When using the tool outdoors, only use extension
cables intended for outdoor use. A suitable rated
extension cable of up to 30 meters can be used
without loss of power.
> Electric safety can be further improved by using a
high sensitivity.
Use only a 3-blade grounding plug and a 3-slot
receptacle that will accept the plug on the product.
Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
If an extension cord is to be used after the cord type
designation. For example, a designation of SJTW-A
would indicate that the cord would be appropriate
for outdoor use. For proper size cords see chart.
GUIDE FOR EXTENSION CORD USAGE:
Type of cable
Up to 5 metres
From
5 to metres
10 metres
Parallel
2x 1.0mm
2
2x 1.5mm
2
WARNING! Some spray materials contain
chemicals known to cause cancer, birth defects or
other reproductive harm. To reduce your exposure
wear appropriate safety equipment such as face
masks, gloves, and other appropriate protective
equipment. Please review and follow the safety
precautions on the paint container.
FEATURES (FIG. A, FIG. A1, FIG. A2)
1. Spray gun unit
2. Power unit
3. Tip collar
4. Air cap
5. Nozzle (Φ1.5mm/Φ3.5mm)
6. Y-type seal ring
7. Spray width lever
8. Spray tip
9. Spray unit housing
10. Trigger
11. Flow control knob
12. Quick refill lid
13. Sealing liner
14. O-ring
15. Pickup tube
16. Check valve assembly
16.1 Check valve sleeve 1
16.2 Check valve
16.3 Spring
16.4 Check valve sleeve 2
16.5 Valve extension
17. Canister
18. Quick release lock
19. Switch trigger lever
20. Hanging hook
21. Filter
22. Filter cover
23. Viscosity cup
24. Cleaning needle
25. Cleaning brush
26. Spray tip key
ELECTRICAL SAFETY
EXTENSION CORD