background image

Check if all the components are complete before installation, the components and quantity of 

each set as follows:

Solar Panel Components:

Lighting:

LED street light

Bracket 

hasp 4pcs

M8*16 

screw 6pcs

M6 cap 

nut 8pcs

M6 spring 

washer 8pcs

X bracket

1pc

Bird spike 2pcs

Self-tapping 

screw 6pcs

M8*16 Screw 6pcs

2M DC 

extended cable 

2pcs

M8*25 

screw 2pcs

Part List

Off-grid solar power supply system (Take gateway for example)

4G  NODE Antenna

1pc each (Gateway type standard) 

*For EDGE

NODE Antenna

1pc (NODE terminal standard) 

*For EDGE

AE6 series is the latest double-sided photovoltaic module high power solar street light released by 

LEADSUN, it adopts higher conversion efficiency mono-crystalline silicon double-sided solar panel, 
high luminous efficiency LED, long lifespan lithium battery, infrared motion detection and self-developed 
efficient controller, which is the most reliable powerful performance solar lighting solution and a future 
design masterpiece provided by LEADSUN.

Overview

1. Definition of the native mode

OFF mode:

The system will not work,  charge or  

discharge.

Transport (idle) mode:

 the system will power off in 

an hour and goes to the OFF mode.  

ON mode:

 the system will work normally, charging 

in the daytime and discharging at night.

*

*

*

2

.

 Start up 

Daytime start-up:

 when the lighting condition is 

sufficient 

(

>30lx), the 

light will illuminate for 20 

Night start-up: 

*

*

OFF

mode

ON

mode

Button Switch

Short press, the 

light will switch 

between on and off

Transport 

mode

Short press, the light 

will flash then off

3. Button instructions

Short press the button, if the lighting status does not change, it is in the OFF mode.
Short press the button, if the light flash and then off, it is in transport (idle) mode;
Short press the button, if the light switch between ON and OFF directly, it is in ON mode, In 

this mode, it can switch the light ON by short press the button.

Short press the button (1s) to find out the current product mode:

*
*
*

Operation instruction

6

5

Long press 5 seconds

or if no operation 

for more than an hour

Long press till the 

light is on or lighting 

condition is sufficient 

in daytime.

Long press 

5 seconds

second and then turn off. The light will function 

as normal from that night. If there is not 

sufficient lighting using the Night start-up 

mode is required  

  hold button down for 5 seconds 

After the light goes off, if it meets the normal lighting 

condition the light will function as normal from that 

night.

and release, the light will turn on. Pressing the 

button once will turn the light off. 

Содержание AE6 Series









Отзывы: