Product maintenance
Product recycling
In order to assure that the solar panel receive the light efficiently, please use clear water
to clean the dirt mark on the surface of the panel regularly and prohibit the use of
chemical or abradant which includes chlorobenzene.
Only manufacturer, service agent or qualified personnel can replace the light source or
other circuit components of the lighting device. Without authorization, using the third
party component to replace is prohibited or it would cause serious damage to the
product. if the user disassembles the product without authorization, warranty becomes
void.
If you need to replace the components /accessories, please go to
www.leadsun.com.au, or contact your local distributor .
The product is made of recyclable high-performance materials and components, please
don't dispose with other household garbage.
Please understand the local rules about the separate collection of electronics and
electrical products, dispose the waste products in the right way that avoids potential
negative effects to environment and human health.
Cautions
Transportation and storage
Working condition
Attention
Please read the below cautions carefully before using the AE6 series solar
street light to avoid physical injury and product failure caused by improper use.
Product protection grade Ip65
High tensile structure design can withstand level 3 typhoon (58m/s), beyond this level
might cause damage to the street light.
Working temperature range from -20
°C
to 60
°C
(charging temperature is limited within
0
°C
to 60
°C
). The product with heating function can work under -40
°C
to 60
°C
.
The product contains high capacity lithium-ion battery components, please follow the
aviation transport law. Please regard the product as the flammable and explosive
hazardous substance and store it separately from other goods.
The solar panel of the product is fragile, tier limitation is two layers. No stacking out of
limits and No press with heavy stuff.
Store the product under the temperature from 0
°C
to 45
°C.
It should be charged every six months if the product is stored for long time. please use
the special charger to charge the product (the charger needs additional purchase) in
order to avoid battery or device damage.
1
2
A licensed electrician is required to install the unit with an AC power supply.
If this product contains the main power supply it must be installed by a licensed electrician.
Please ensure this light fixture is installed in accordance to local regulations.
