Leadshine Technology MA860C Скачать руководство пользователя страница 14

                                      MA860C Full Digital Stepper Drive Manual V1.0

 

 

 

APPENDIX 

Twelve Month Limited Warranty   

Leadshine Technology Co., Ltd. warrants its products against defects in materials and workmanship for a period of 12 months from 

shipment

 

out of factory. During the warranty period, Leadshine will either, at its option, repair or replace products which proved to be 

defective. 

Exclusions                                                                                                                           

The above warranty does not extend to any product damaged by reasons of improper or inadequate handlings by customer, improper or 

inadequate customer wirings, unauthorized modification or misuse, or operation beyond the electrical specifications of the product and/or 

operation beyond environmental specifications for the product. 

Obtaining Warranty Service                                                                                     

To obtain warranty service, a returned material authorization number (RMA) must be obtained from customer service at e-mail: 

[email protected]

 before returning product for service. Customer shall prepay shipping charges for products returned to Leadshine for 

warranty service, and Leadshine shall pay for return of products to customer.   

Warranty Limitations                                                                             

Leadshine makes no other warranty, either expressed or implied, with respect to the product. Leadshine specifically disclaims the implied 

warranties of merchantability and fitness for a particular purpose. Some jurisdictions do not allow limitations on how long and implied 

warranty lasts, so the above limitation or exclusion may not apply to you. However, any implied warranty of merchantability or fitness is 

limited to the 12-month duration of this written warranty. 

Shipping Failed Product     

                                                                                           

If your product fail during the warranty period, e-mail customer service at 

[email protected]

 to obtain a returned material authorization 

number (RMA) before returning product for service. Please include a written description of the problem along with contact name and 

address. Send failed product to distributor in your area or: 11/F, Building A3 , Nanshan iPark, No.1001Xueyuan Blvd, Nanshan District 

Shenzhen, China. Also enclose information regarding the circumstances prior to product failure. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание MA860C
















Отзывы: