2. ETHERNET
37
●
WFM - INTEN/SCALE
LV 58SER04 (MPEG DECODER)
Command Parameter1
Description
-128 to 127
Adjusts the intensity of the video waveforms.
WFM:INTEN:WFM
?
Queries the intensity of the video waveforms.
WHITE
Sets the waveform display color to white.
GREEN
Sets the waveform display color to green.
MULTI
Sets the waveform display color as follows: Y: Yellow, Cb:
Cyan, Cr: Magenta, G: Green, B: Blue, and R: Red.
WFM:COLOR
?
Queries the waveform display color.
-8 to 7
Adjusts the intensity of the scale.
WFM:INTEN:SCALE
?
Queries the intensity of the scale.
HDV_SDP
Sets the scale unit to V for HD and % for SD.
HDV_SDV
Sets the scale unit to V.
HDP_SDP
Sets the scale unit to %.
WFM:SCALE:UNIT
?
Queries the scale unit.
ON
Displays the 75% scale.
OFF
Does not display the 75% scale.
WFM:SCALE:COLOR75P
?
Queries the presence of the 75% scale display.
WHITE
Sets the scale color to white.
YELLOW
Sets the scale color to yellow.
CYAN
Sets the scale color to cyan.
GREEN
Sets the scale color to green.
MAGENTA
Sets the scale color to magenta.
RED
Sets the scale color to red.
BLUE
Sets the scale color to blue.
WFM:SCALE:COLOR
?
Queries the scale color.
●
WFM - GAIN/SWEEP
LV 58SER04 (MPEG DECODER)
Command Parameter1
Description
CAL
Sets the gain mode of the waveform to a constant (x1).
VAR
Sets the gain mode of the waveform to variable
(×0.200 to ×2.000).
WFM:GAIN:VAR
?
Queries the gain mode setting.
0.200 to 2.000
Sets the variable gain value of the waveform.
WFM:GAIN:VAL
?
Queries the variable gain value of the waveform.
X1
Sets the magnification of the waveform to x1.
X5
Sets the magnification of the waveform to x5.
WFM:GAIN:MAG
?
Queries the magnification of the waveform.
H
Sets the sweep mode to the line display.
V
Sets the sweep mode to the field or frame display.
WFM:SWEEP:SWEEP
?
Queries the sweep mode setting.
1H
Sets 1 line display.
2H
Sets 2 line display.
WFM:SWEEP:H_SWEEP
?
Queries the line display setting.
1V
Sets 1 frame display if the input signal is progressive.
Sets 1 field display if the input signal is interlace or
segmented frame.
2V
Sets 1 frame display.
WFM:SWEEP:V_SWEEP
?
Queries the field or frame display setting.