Leader LV 5800, Инструкция по эксплуатации

Страница: 37 / 93

2. ETHERNET
35
2.4.5 LV 58SER04 Commands (MPEG DECODER)
● UNIT SETUP LV 58SER04 (MPEG DECODER)
Command Parameter1 Parameter2 Description
ON Sets the selection method of DECODE
PID to an automatic setting.
OFF Sets the selection method of DECODE
PID to a manual setting.
SYS:UNIT:SEMI_AUTO 1,2,3,4 (*1)
? Queries the selection method of
DECODE PID.
ON Detects the Sync Byte error.
OFF Does not detect the Sync Byte error.
SYS:UNIT:ERROR:SYNC_BYTE 1,2,3,4
? Queries the presence of detecting the
Sync Byte error.
ON Detects the Continuity error.
OFF Does not detect the Continuity error.
SYS:UNIT:ERROR:CONTINUITY 1,2,3,4
? Queries the presence of detecting the
Continuity error.
ON Detects the PAT error.
OFF Does not detect the PAT error.
SYS:UNIT:ERROR:PAT 1,2,3,4
? Queries the presence of detecting the
PAT error.
100 to 800 Sets the interval (msec) becoming the
PAT error. SYS:UNIT:ERROR:PAT:CYCLE 1,2,3,4
? Queries the interval becoming the PAT
error.
ON Detects the PMT error.
OFF Does not detect the PMT error.
SYS:UNIT:ERROR:PMT 1,2,3,4
? Queries the presence of detecting the
PMT error.
100 to 800 Sets the interval (msec) becoming the
PMT error. SYS:UNIT:ERROR:PMT:CYCLE 1,2,3,4
? Queries the interval becoming the PMT
error.
ON Detects the PID error.
OFF Does not detect the PID error.
SYS:UNIT:ERROR:PID 1,2,3,4
? Queries the presence of detecting the
PID error.
1 to 20 Sets the reception number of times of
PMT becoming the PID error (section). SYS:UNIT:ERROR:PID:CYCLE 1,2,3,4
? Queries the reception number of times
of PMT becoming the PID error
ON Detects the Transport error.
OFF Does not detect the Transport error.
SYS:UNIT:ERROR:TRANSPORT 1,2,3,4
? Queries the presence of detecting the
Transport error.
ON Detects the CRC error.
OFF Does not detect the CRC error.
SYS:UNIT:ERROR:CRC_MPEG 1,2,3,4
? Queries the presence of detecting the
CRC error.
*1 Enter the unit number in which LV 58SER04 is installed.