Leader LV 5770SER42, Инструкция по эксплуатации

Страница: 10 / 67

2. AUDIO DISPLAY
7
2.3.2 Selecting the Channel to Decode
When F•1 DECODE MODE is set to DOLBY E or DOLBY D, to select the channel to
decode, follow the procedure below.
CH 9,10 to CH15,16 can be selected when F•6 MIX MODE is set to ON.
Procedure
AUDIO → F•6 DOLBY SETUP → F•2 INPUT GROUP: CH 1, 2 / CH 3, 4 / CH 5, 6 /
CH 7, 8 / CH 9,10 / CH11,12 / CH13,14 / CH15,16
●
When INPUT SELECT Is Set to SDI and MIX MODE Is Set to OFF
Channels selected using F•2 INPUT GROUP are decoded and displayed as channels
D1 to D8.
The channels that you can select with F•2 INPUT GROUP are the channels in the group
selected with 1ST GRP SELECT and 2ND GRP SELECT.
For information on the 1ST GRP SELECT and 2ND GRP SELECT setting, see section 2.1.2, “Selecting
the Channels to Measure.”
Figure 2-6 EMB Dolby display