Leader LV 5770SER42, Инструкция по эксплуатации

Страница: 29 / 67

6. AUDIO STATUS DISPLAY
26
● Channel
Displays audio channels.
Each item below this item is displayed in two lines. The top line corresponds to the channel
to the left of the slash, and the bottom line corresponds to the channel to the right of the
slash.
●
Level
Display audio levels numerically.
● Level Over
Counts the number of times that the level of the input signal is greater than or equal to the
set value.
● Clip
Counts the number of times that a received signal exceeds the maximum signal value
specified by F•5 ERROR SETUP for the specified number of consecutive samples.
● Mute
Counts the number of times that the length of a received mute signal exceeds the period
specified by F•5 ERROR SETUP.
●
Parity Error
Counts the number of times that the input signal’s parity bit and the recalculated parity bit
differ.
● Valid Error
Counts the number of times that the input signal’s validity bit is 1.
● Crc Error
Counts the number of times that the CRC of the channel status bits and the calculated
CRC are different.
● Code Violation
Counts the number of times that the state of the input signal’s biphase modulation is
abnormal.
●
Reset
The time that has elapsed since F•6 ERROR RESET was pressed is displayed here.