Leader Like Me, Инструкция по эксплуатации

Страница: 14 / 61

Preparing To Sew
Note
:
Thread tension
The bobbin thread tension has been
adjusted at the factory and
readjustment is not usually required.
In order to obtain better zigzag
stitches, the upper thread tension
should be sightly weaker than the
bobbin thread tesion. That means,
the upper thread should appear
slightly on the reverse side of the
fabric, but the bobbin thread cannot
appear on the top side of the fabric.
Lower thread tension:
a: To set the bobbin thread tension,
remove the bobbin case with the
bobbin from the machine and hold
the bobbin case suspended by
the thread.
Shake it once or twice.
If the tension is correct, the
thread will unwind by about an
inch or two.
If the tension is too tight, it will not
unwind. If the tension is too
loose, the thread will unwind
more than two inches.
b: To adjust the tension, turn the
small screw on the side of the
bobbin case.
Upper thread tension:
c: Turn Thread Tension to
adjust the tension. Standard
thread tension setting is “3-4".
d: To increase the tension, turn the
dial up to a higher number.
e: To decrease the tension, turn the
dial to a lower number.
f: Normal thread tension.
12