LEADER HALF PINT EVAPORATOR
LEADER Half Pint Evaporator
Year: 2014
Page: 9
BACK
1.
You will need 13 half bricks
2.
Cut bricks for the locations as labeled
a.
B1 – 4” X 6.5”
b.
B2 – 3.5” X 6.5”
3.
Apply a coat of cement to the back panel.
4.
Place the bricks into the arch as illustrated. Remember to coat the edges of the bricks with approximately 1/8”
of refractory cement.
5.
The end bricks of the bottom row should slide behind the bottom end full bricks on each side by ¼”.
6.
Fill the gaps between the smoke stack elbow and the brick with refractory cement.
SIDES
1.
Both sides are laid out the same. Mirror the above diagram for the left side of the arch.
2.
You will need for each side; 7 full bricks, 11 – ½ half bricks
