Leader Maple Cream Machine
Year: 2014
Page: 6
3.
The top of the paddle bar has two holes in
each end. Insert the paddles into the paddle
holders on the paddle bar. The top of the
paddle rod should be on the same side as
the top of the paddle bar
5.
Install the outer paddle (the one with the
projection of the bottom). The outer
paddle holder slot (in the paddle bar) is the
one that opens furthest to the outside for
the pan
a.
Suggested alignment marks are
provided on the top of the paddle
rods. Line the Paddle Bar Alignment
Groove with the paddle bar. Line the
Thumbscrew Alignment Groove with
the thumbscrew and so it points to the
thumbscrew.
4.
Position the paddles about ½” from the
bottom of the paddle bar then tighten the
thumbscrew to hold the paddles. Place
the paddle bar on the base pins. Lock the
paddle bar in place using the snap locks
inserted into the outer holes on the top of
the paddle bar.
