ENGLISH
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig Subject to errors and amendments Information / Technical support: www.lead-energy.com
Thank you for choosing a product from LEAD energy
AG. If you would like to get in touch with our service
team, please contact them via our website or by
e-mail.
?
[email protected]
www.lead-energy.com
Intended use
Note
Please observe the warnings prior to installation.
You can use the USB LED STRIPS for the decorative
lighting of your technical devices. Power can be sup-
plied over a conventional USB connection.
Mounting
1
Danger
Always only operate LED STRIP products in an
unwound state. Operating an LED STRIP product in a
wound state may lead to irreparable damage.
Remove dirt, grease and other residue from the sur-
face on which you want to mount your LED STRIP
before installation. Peel the protective film away from
the adhesive strip and position the LED STRIP in the
required place applying light pressure.
Kürzen
1.1
You can shorten your LED STRIP before mounting by cutting it with a pair of scissors in the places provided. To fur-
ther guarantee the IP protection class, use the silicon cap provided and the silicon adhesive to protect the cut-off
end against moisture.
WARNING: You should never shorten the LED STRIP while it is connected to the mains. Before shortening the strip,
disconnect it from the power supply, otherwise there is a risk of injury or death.
