Installation instructions
Installation
Page 11 of 18
Single operation with CLP combi
In order to connect the lithium-ion battery in single operation with 230 V
consumers, you need a suitable inverter. LEAB recommends the CLP combi
inverter. To connect the CLP combi and the
230 V consumers, perform the following steps:
For installation you need an installation relay.
LEAB recommends the Eltako R12-110-230V relay
(part no.: 9905043791).
Before installation, make sure that the combi is switched
off.
The wiring diagram shows the lithium-ion battery connected to
CLP combi.
