manualshive.com logo in svg

LEAB 0101036982, Руководство пользователя

Поделиться
Скачать
LEAB 0101036982 Скачать руководство пользователя страница 5

 WARNING

Risk of fire from overheated battery
Flammable gases can escape if the battery overheats.

1. Always charge batteries in well-ventilated rooms and away

from ignition sources.

 WARNING

Burns from escaping acid
Acid can leak out when handling batteries.

1. Wear acid-proof clothing when handling batteries.

 WARNING

Risk of injury from damaged, frozen or deformed batteries
Damaged, frozen or deformed batteries can cause injuries.

1. Before using the battery, make sure that the battery is un-

damaged and the electrolyte is not frozen.

2.2 Foreseeable Misuse

The charger is designed for Interior use in vehicles. Never assemble the char-

ger outside the vehicle. The charger is designed to charge all types of Lead-
acid batteries (wet, gel, AGM) and lithium batteries. Charge only the specified

battery types with the charger.
To avoid damage, never pinch the leads of the charger. In the event of dam-
age, unplug the charger immediately and contact your dealer or LEAB.

Notice

Device defects from incorrect installation
Incorrect installation can result in device defects.

1. Install the device in a dry and cool location.

5

LEAB Automotive GmbH

Thorshammer 6

24866 Busdorf

LEAB Automotive GmbH

2 Safety

Содержание 0101036982





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды