8
Never use oil for 4-cycle engine use or water cooled 2-cycle engine. If can cause spark plug
fouling exhaust port blocking or piston ring sticking.
Mixed fuels, which have been left unused for a period of one month or more may clog the
carburetor or result in the engine failing to operate properly. Put remained fuel into an airtight
container and keep it in the dark and cool room.
Mix a regular grade gasoline (leaded or unleaded, alcohol-free) and a quality-proven
motor oil for air-cooled 2 cycle engines.
RECOMMENDED MIXING RATIO GASOLINE 40: OIL 1
Warning! Take care of the emission of exhaust gases.
Always shut off engine before fueling. Never add fuel to a machine with a running or
hot engine. Take care of fire!
–
Unscrew the tank cap and remove it.
–
Pour in the fuel carefully, Avoid spilling
– Screw the tank cap on firmly by hand.
Draining fuel
-
Hold a collection container beneath the fuel drain bolt.
-
Unscrew the tank cap and remove it.
-
Allow the fuel to run out completely.
-
Screw the tank cap on firmly by hand.
Start on the unit
Do not start the unit until it has been completely assembled. Before switching on the unit,
always checking the oil
Check before use!
Risk of device damage!
The device is supplied without motor or gearbox oil.
ATTENTION!
Before operating, you must fill it with fuel.
