14
If you slip or fall stop accelerating and move the
Clean the work area and eliminate any obstacles
that could cause accidents.
and remove any objects that could cause the nylon
head of the machine to get tangled on. Also remove
any parts that the disc could violently hit causing
these to move in the direction of the user or other
people and/or animals.
All other people must be at least at a distance of 15
metres as it is a dangerous area.
Do not use this machine at night, with fog and with
It is imperative that the engine is turned off when
carrying the machine from one working area to
another.
Do not start the machine in a closed area.
The exhaust fumes, the vapours of the petrol and
the chain oil, all contain carbon monoxide and other
dangerous chemical substances.
In case of gas concentration due to
insufficient ventilation, eliminate from the
until it is well ventilated and the gas concentration
does not happen again.
Never leave this machine unattended.
Never touch elements that can be hot during
the start up or operating the machine, for
Always regulate the machine on a flat and stable
surface.
Do not use accessories except those recommended
by our company as otherwise the use of other non
original accessories could cause severe damages to
the end user, to passers-by and to the machine.
7.1. CUT WITH THE HEADER OF WIRE
can cause serious damage to the head and the eyes.
this unit.
Use the head line in difficult areas. If the header hits a
status. Do not use damaged or poorly balanced heads.
Remember that the end of the nylon threat is the one
introduce the entire head in the cutting area. Enter
the head slowly and let the nylon tips cut the grass at
their own pace.
1. Hold the brush cutter in the way that the head do
not touch the ground and with an inclination of
20º in the sense you are cutting.
the grass fall into the cutting area.
Be careful to not hit the head
ground. The beatings against
objects or the ground will
reduce the life of the head,
may spoil creating a dangerous
environment for you and the
people close to you.
The nylon threads are shortened with the use, when
they are too short accelerate the engine and press the
head against the ground. Then leave wire from the
head. If you leave too much wire the blade will cut in
excess.
