13
Allow the engine to warm up for approximately one
6.4.1. STARTING THE MACHINE FROM HOT
position.
3. Pull the start rope until the machine starts.
If the machine does not start after pulling at the rope a
few times, please refer to the cold start up section.
6.4.2. ENGINE STOPPAGE
at idle speed for a few seconds.
2. Stop the engine by displacing the switch from the
Only use this machine for those jobs for
which it has been designed.
The use of this
brush cutter for other uses is dangerous and
could cause damages to the user and/or the machine.
Do not bring any cutting elements near
when the machine is in use and the
engine running.
Do not rely solely on the warning signs on the
machine.
Be always alert.
Do not use the machine if you are feeling
tired, unwell or under the effects of
medication, intoxicating substances or
alcohol.
Lack of sleep and fatigue can cause accidents and
damages.
Limit the usage time of the machine to 10
minutes and rest a further 10 to 20 minutes between
It is neccesary to pay attention to posible loosening
or overheating of parts of the machine.
If you detect
the repair service. In any case you should continue
Putt he harness before starting the machine and set
the machine to harness.
Always hold the unit with
both hands on the handlebars and support the weight
Remember to always use the machine with clean
hands and without petrol and oil. Be particularly
attentive if you use the machine under the rain as the
ground will be slippery.
7. MACHINE USAGE