Le Maitre Neutron XS Hazer, Руководство по эксплуатации

Страница: 6 / 15

www.lemaitrefx.com
The machine should be fitted with a 2 litre Le Maitre Neutron Hazer
fluid container.
The use of any other fluid will lead to damage of the ‘Hazing Ele-
ment’ .
Remove the main cover by releasing the two thumb screws, situated
rear top and front lower and sliding the cover forward, up and out.
1.) Place the bottle securely into the machine and remove its sealing
cap. Insert the fluid feed pipe and secure the fluid cap, making
sure that the air vent in the cap is clear from obstruction.
2.) Plug the machine into a suitable main power supply. Set the
‘Mains’ switch to the On position, located on the rear panel.
The ‘Mains’ switch will illuminate to indicate the presence of ‘Mains’
power.
A clean power supply is essential
to the operation of the Neutron. For
this reason we do not recommend
the supply of mains power from a
lighting dimmer.
3.) Set the ‘Haze’ switch to the On
position, located on the rear
panel.
The ‘Monitor’ led should now
begin to flash continuosly indi
cating that the initial auto
cleanse phase has commenced.
Please note , if the Neutron XS Hazer shut down cycle has not been
allowed then it is possible that small amounts of fluid will be ejected
during the auto cleanse phase.
Operating Procedure
4
Note