Zhengzhou Ledy Optical-Electrical Technology Co., Ltd.
As below figure shown, put the new gobo on magnet base, adjust the gobo and the
base to be concentric.
17-magnet base 18-gobo 19-motor
Sharpness Adjust
Turn on the projector power, rotate the lens. When projection distance is long, shorten
the lens till image clear; While distance is short, lengthen the lens till image clear. And
the last, please fasten the lock nut to avoid loosening of lens.
Maintenance & Attention
1. Please read the installation instructions carefully before use, and operate in strict
accordance with this manual sheet.
2. Because of the high calorific value when projector works, it cannot be installed in
flammable explosive place, or the place that can be touched, in order to avoid
accident. If you want to install where can touch easily, need to add partition or
warning board.
3. Please ensure that all maintenance work is under the condition of power off.
4. Please clean lens and gobo regularly.
5. Please regularly check the products operation condition(3 months suggested), in
order to avoid safety accident caused by the product problems.
