LDARC ET 3S Series, Инструкция по эксплуатации

Страница: 6 / 11

M4(CW) M2(CCW)
M3(CCW)
Note:pay attention to the direction of rotation of the motor
when installing the prop
M1(CW)
+ -
M1
M2
M3
M4
AC900(S-FHSS+D16) bind,transmitter(FRSKY X9D/Futaba T18SZ)
Bind:Check receiver mode before bind,the first blink after power on indicate the setting, is S-FHSS, is D16
FUTABA S-FHSS BIND:Turn on the TX then power on AC900 while pressing the key, green LED fast blink meaning already in bind
mode, user can release the key. Bind procedure is completed and the receiver is working normally when green LED is solid
FRSKY D16(NO Telemetry) BIND:Power on AC900 while pressing the key, green LED fast blink meaning already in bind mode,
user can release the key, then set your TX into D16 bind mode. red LED solid meaning bind finished, exit TX from bind mode,
receiver’s green LED solid meaning working normally
-5-
ESC
Receiver Bind
Motor