LDA MPS-8Z, Руководство по поддержке

Страница: 3 / 5

MPS-8Z connection to an audio system with ZES-22
This will be the input connection to the MPS-8Z microphone (ACSI bus). From there, the
cable configuration for the connection to the ZES22 is done with the following pinout:
Pin Color Connection
1 Stripe orange Audio +
2 Oranje Audio -
3 Stripe Green GND
4 Blue RS-485 A
5 Stripe Blue RS-485 B
6 Green GND
7 Stripe Red + 24 V
8 Red + 24 V
Table 1: Pinout of the RJ45 connector
These connections must be made using three-way Euro Block type connectors,
differentiating between the RS-485 port and the audio input.
Following the indications in the Picture 3: ZES-22 Audio Matrix Connections, these
connectors are marked as 1
st
: audio input/output channels and 2
nd
: RS-485. In addition,
for correct configuration, the audio input must be made to channel 3.
Picture 2: Colour chart for RJ45 type B connections