Connection to public address system with SIME (MPS-8Z with ZES22 matrix)
Support Handbook - LDA MPS-8Z S02
1 INTRODUCION
This handbook shows the proper way to connect a public address microphone LDA MPS-8Z
system with SIME software, using the digital audio matrix ZES-22 S02.
1.1
Power supply
The MPS-8Z microphone is provided with a 5V dc USB connector external power supply,
which is connected via a miniUSB AB male to USB A male cable, also supplied. To power the
equipment you can use it, or power the equipment directly from the ACSI bus, through its
connection to the bus. At this case, save the power supply for use it later.
1.1.1 POWER SUPPLY SELECTION
MPS-8Z systems have a power supply DIP-
Swicth selector that allows to manage the
power source. You can switch between local
or ACSI bus power suply. When the switch
are set at OFF positions, that means it is
been supplied by local power source. At ON
position, the MPS-8Z will be supplied by
ACSI bus.
In case of both power supply sources were
connected, DIP-Switch must be set at ON
position (ACSI bus). This way, MPS-8Z will
have redundance and keep working even
ACSI bus goes down.
Picture 1: Microphone MPS-8Z, 5V power supply and UTP wiring connector.
Picture 2: Power selector for MPS-8Z
