LDA Audio Tech LDAVAP1, Руководство пользователя

Страница: 21 / 28

When connecting keyboards for a set to be mounted in a rack (see section 6.1), the
connection between the last keyboard of the first row, and the last keyboard of the second must be
done with the connection ribbon cable provided with the equipment. In that case, the configuration
of the expansion keyboards address (see section 4.5) can be done as shown in Illustration 15,
where you can see where the ribbon cable must be placed. To make this connection, the whole set
even the mounting accessories must be mounted.
5 UPDATE
If an equipment Firmware update is required, make sure that the update image provided
matches your model. If the equipment has expansion keyboards connected it is not necessary to
disconnect them.
The update is performed from the NEO System Configuration Software. In the device view
it will be possible to send a firmware update.
The update process is automatically made from the NEO equipment to the ACSI devices.
This may take a few minutes depending on the device and the system. During this time the device
will not be operational.
LDA Audio Tech - Severo Ochoa, 31- 29590 MALAGA, SPAIN. Tel: +34 952028805 www.lda-audiotech.com/en
15
User’s Manual: VAP 1
Illustration 15: Expansion Keyboard Connection. Rack mounting