7
DEUTSCH
ENGLISH
FRANCAIS
ESPAÑOL
POLSKI
ITALIANO
简体中文
繁體中文
between the slave unit and the master unit, the green STEREO LINK LED on the slave unit lights up permanently and the blue Bluetooth LED flashes
slowly (approximately 0.3 Hz). During the pairing process, the green STEREO LINK LEDs of both systems flash rhythmically at a frequency of about 3 Hz.
The left channel of the stereo signal is reproduced by the master unit and the right channel by the slave unit.
7
STEREO LINK
A. Stereo system with 2 x MAUI P900 and 1 x Bluetooth playback device: Pair the desired Bluetooth playback device with the left MAUI P900 system.
The left system automatically becomes the master unit (press HOLD TO LINK for 3 seconds). If necessary, disconnect an existing Bluetooth connec
-
tion with a Bluetooth playback device on the right MAUI P900 system (Press and hold HOLD TO LINK and STEREO LINK simultaneously for one second).
To pair the right MAUI P900 system with the master unit, press and hold the STEREO LINK button on both devices for approximately 3 seconds within
30 seconds. The right system automatically becomes the slave unit (max. distance 15 m). The master unit transmits the left channel of the stereo
signal from the Bluetooth device and the slave unit the right channel.
B. Stereo system with 2 x MAUI P900 without Bluetooth playback device: Disconnect any existing Bluetooth connection between the slave unit and
a Bluetooth playback device by pressing and holding both buttons HOLD TO LINK and STEREO LINK on the slave unit simultaneously for approximately
1 second. When pairing two MAUI P900 systems, ensure that the distance between the systems is no more than 15 metres. Press and hold the STEREO
LINK button on the master unit for approximately 3 seconds and press the STEREO LINK button twice in quick succession on the slave unit. Pairing
occurs automatically within approximately 30 seconds. The master unit transmits the left channel of the stereo signal from a Bluetooth playback
device and the slave unit the right channel. Pairing a Bluetooth playback device with the master unit can now be done later.
Please note:
• When the MAUI P900 systems have been switched off and back on, the Bluetooth playback device will pair automatically and the systems will
connect with each other automatically.
• To cancel a Bluetooth connection between a Bluetooth playback device and a STEREO LINK connection, press and hold the HOLD TO LINK (No. 5) and
STEREO LINK (No. 7) buttons simultaneously for about 1 second. This deletes the entire list of paired devices (factory setting).
• The maximum number of paired Bluetooth devices is 8 (including paired MAUI P900 systems). If another device is paired, the last entry from the
list of stored devices will be deleted. A maximum of 1 playback device and 1 MAUI P900 system can be connected simultaneously with a Bluetooth
unit as a stereo extension.
For information regarding the operation of the Bluetooth and stereo link module and the different Bluetooth and stereo link operating modes,
please refer to the following tables.
Operation of Bluetooth and stereo link module
HOLD TO LINK
STEREO LINK
Pair Bluetooth unit with playback device
Press for 3 seconds
Pair stereo link – master unit
Press for 3 seconds
Pair stereo link – slave unit
(playback device paired with master unit)
Press for 3 seconds
Pair stereo link – slave unit
(no playback device paired with master unit)
Press briefly twice
Reset
Press simultaneously for 1 second
Bluetooth and stereo link status
Bluetooth LED (blue)
STEREO LINK LED (green)
Pair Bluetooth unit with playback device
Flashes (3 Hz)
Off
Bluetooth unit is paired and connected only with playback device
On permanently
Off
Pair Bluetooth unit with playback device (as stereo link – master)
Flashes (3 Hz)
On permanently
Pair slave unit – stereo link to master unit
Flashes (0.3 Hz)
Flashes (3 Hz)
Slave unit – stereo link paired with master unit
Flashes (0.3 Hz)
On permanently
Slave unit – slave unit paired but not connected
Flashes (0.3 Hz)
Off
Master unit – stereo link pairing without bluetooth connection to playback device
Off
Flashes (3 Hz)
Master unit connected to slave unit but without Bluetooth connection to playback
device
Off
On permanently
Master unit – stereo link pairing with bluetooth connection to playback device
On permanently
Flashes (3 Hz)
Master unit connected to slave unit with bluetooth connection to playback device
On permanently
On permanently
Neither bluetooth nor stereo link connection
Off
Off
