9
B
If the standard set-up of the DAVE G4X speaker system is not desired or possible, the set-up can be done
with a distance rod and a stand fork mounted on the subwoofer
C
. In order to achieve an impressive
stereo sound and to avoid unpleasant interference, select the DSP preset that corresponds to this setup
variant (MODE SELECT, right symbol) and use the stereo input INPUT 3L / 4R for control (XLR/jack combo
sockets or cinch sockets).
C
To set up 2 complete DAVE G4X speaker systems, positioned left and right in front of a stage, also use
distance rods with stand forks mounted on the subwoofers
D
. For both systems, select the DSP preset
that corresponds to this set-up variant (MODE SELECT, right symbol) and assign one mono channel each
(e.g. INPUT 1, SELECT LINE) to the left and right line signal of a feed device (e.g. mixing console). The
loudspeaker cables of a system should be crossed and connected to the satellites (right system in the
example).
