LCI SlimRack Slide-out, Инструкция по сборке, Страница: 2 / 8

Rev: 07.12.18
Page 2
CCD-0001607
TABLE OF CONTENTS
Product Information 2
Additional Warranty Exclusions
2
Safety Information 2
Resources Required 3
Component Descriptions
3
Installation 4
Gear Rack Assembly
4
Installing the Gear Rack Assembly 4
Notes 7
System Information
The Lippert Components, Inc. SlimRack® Slide-out System can now be shipped disassembled at the large
components level (Fig. 1). This means that some assembly will be required prior to the installation of the
SlimRack® Slide-out System onto the slide-out room. The following instructions are supplied as a guide
to the proper assembly of the shipped components for the best possible functioning and operation of
the SlimRack® Slide-out System. This manual is to be used in conjunction with the SlimRack® Slide-out
Programming Installation and Service Manual.
Additional Warranty Exclusions
In addition to the terms, conditions and exclusions set forth in the Lippert Components, Inc.'s Limited
Warranty incorporated herein:
1.
Any claim that is submitted involving damage or dysfunction due to a gear rack misalignment will be
excluded from warranty coverage; and
2.
Any claim that is submitted involving damage or dysfunction due to a bracket failure, including but
not limited to the gear rack disengaging from the bracket, will be excluded from warranty coverage;
and
3.
Any claim that is submitted involving damage or dysfunction due to improper removal and
re-installation of the motor assembly will be excluded from warranty coverage.
Safety Information
Fig. 1
Moving parts can pinch, crush or cut. Keep clear and use caution during assembly.