●
The ambient temperature must always be under +35° C
Set Up
Power Supply:
Before plugging your unit in, be sure the source voltage in your area matches
the required voltage for your light is workable in 100-220V/50~60Hz. Because line voltage may
vary from venue to venue, you should be sure your unit voltage matches the wall outlet voltage
before attempting to operate you fixture.
Operating Instructions
Operating Modes: You can use the LCG-WF-5C in 5 ways:
●
Sound activation – The unit will activated by the sound signal.
●
Static display – The unit will display the color in static way.
●
Auto Mode -The unit will automatically chase through the different patterns.
●
DMX control mode -This function will allow you to control the lighting with a standard DMX
512 controller.
●
Battery powered – This function will allow you to control the lighting independently without
any DMX cable
DMX Mode:
Operating through a DMX controller give the user the freedom to create their own
programs tailored to their own individual needs. This function also allows you to use your
fixtures as pattern changing lights.
1. This function will allow you to control each individual fixtures traits with a standard DMX 512
controller.
2. The LCG-WF-5C use 5/9 DMX channels to operate. Please see “DMX channel and
Functions” for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard
DMX controller. Set your desired DMX address following the setup specifications that come with
your DMX controller.
4. The unit can automatically recognize the DMX signal once the DMX connection is done.
DMX Linking:
To ensure proper DMX data transmission, when using several DMX fixtures try to use the
shortest cable path possible. The order in which fixtures are connected in a DMX line does not
influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be
placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When
a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to
address 1 to that unit, no matter where it is located in the DMX chain.
3
