Mixlaser II User Manual
- - 8 - -
90-129
Red and Green
130-169
Red and Green flicker
170-209
Green and Red flicker
210-249
Red, green synchronous flicker
250-255
Red, green alternative flicker
CH8
Laser Strobe
Control
0-9
Strobe Off
10-244
Strobe Speed
（
from slow to fast
）
245-255
Laser strobe by sound
CH9
LED Step Motor
Control
0-8
Step motor Off
9-127
Step Motor clockwise from slow to fast
128-255
Step Motor counterclockwise from slow
to fast
CH10
Laser Step Motor
Control
0-127
Laser pattern choose
128-255
Laser pattern chase from slow to fast
DMX-512 connection
3-Pins DMX Out
3-Pins DMX In
(Female)
(Male)
1 Earth
2 DMX-
3 DMX+
DMX address setting
Each fixture must set a specific starting address. When receiving signal transmission, fixture will
receive channel control signals which from the starting address.
According to different requirements or easy to use, the user can set many value fixtures to the same
address, also can set up a separate address for every device.
If you set the same address,all the devices will receive from DMX channels signal. All connecting
fixtures are jointly controlled, controller can't separate control a device.
If you set a different address, each device will be separate from its particular set the starting address
