- 22 -
CONNECTION WITH TM-U295 / LX-300
WEIGHINGS STORAGE AND PRINTING CONDITIONS
-
: factory settings restore: the weight must vary compared to the last stored weight and
must be stable; confirmation is requested (
),press ENTER to proceed or press ESC to
cancel.
-
: the weight must fall below the minimum weight (20e) for a new storage to be carried
out; select
or to enable or disable the control.
-
: the weight must be changed compared to the previous one for a new storage to be
carried out; select
or to enable or disable the control.
TEST
-
Input Test:
: ensure that for each open input is displayed, is displayed when the input is closed.
-
Output Test:
: setting ensure that the corresponding output opens. Setting ensure that the
corresponding output closes.
-
Millivolt Test:
: displays the load cell response signal in mV with four decimals.
-
Weight in /10 test:
: the current weight in tenths of is displayed for testing purposes.
TM-U295 / LX-300
25 POLES MALE
(WELDING SIDE)
D4 (M)
9 POLES FEMALE
(WELDING SIDE)
2
3
5
2
3
7
+
+
