Quick Guide
1.Insert a SIM card (not included) into the SIM card slot located in the battery compartment of the tracker.
Note: 4G SIM cards are acceptable to use with this device however the unit only operates on a 2G band.
This unit requires data to be activated on your pre-paid or contract SIM card.
(Recommend order 20-30M/Month data package)
2.Connect the wiring loom to the tracker and the bare ended wires to the accessories, ground, engine immobilizer and
external SOS button.
Red Wire – Accessories 12/24V +
Black Wire – Ground (Car or truck chassis)
Yellow Wire – Engine Immobilizer
White Wire – External SOS button
3.Once the unit has been wired up correctly, turn the unit on by pressing the power button until the green LED remains
turned on.
4.Contact your mobile service provider to obtain the APN “name” in order to view the location on the tracking website.
APN’s vary depending on your SIM card’s plan (i.e. pre-paid or contract)
5.Enter the following command via SMS on your the tracker to set the APN “name”:
Send SMS “APN*123456*apnname” (123456 refers to the default password)
For example:
SIM Card Company: Cablw & Wireless
“apnname”: apn01.cwpanama.com.pa
Send SMS: APN*123456*apn01.cwpanama.com.pa
If the APN “Name” has been entered correctly, you will receive a SMS stating “APN:cwpanama.com.pa”(example)
Note: The APN “name” needs to be entered correctly otherwise the location may show up in China, Africa, etc.
6.Login to the tracking website (
www.geniusgps.com
) using the last 7 digits of the serial number for the username
and password which is located in the battery compartment of the tracker.
For example:
Serial number: CC2014012345678
Username: 2345678
Password: 2345678
7.Free “GPSTracker1” app is available on iTunes® and
www.geniusgps.com
tracking platform to easily view the current
tracking location on your iOS® or Android smart phone or tablet.
App name: GPSTracker1
