28
13.5. Major maintenance once per year
Release the device from the base plate and remove the legs from the mechanism (proceed
in reverse order to the steps described in Chapter 4). Remove the crank or the hexagonal
shaft adapter and the M8 nut. Remove the top cover of the mechanism (item 33) and the gear
cover (item 23) (loosen 8 bolts – item 7). After maintenance, reassemble the mechanism.
13.6. Inspection and lubrication of the gears
Fig.15 Major maintenance
Check the condition of the gears. If the teeth are dirty, clean them with a clean lint-free cloth
(when doing this, be careful not to pinch your fingers in the gears). Then grease the gears
using the provided LC Lubricant.
Video #13: Major maintenance once per year
www.
bit.ly/lcm-instructions
13.4. Cleaning the surface of the machine
During use, polymer clay may get stuck to the surface of the machine. You should remove
this material to prevent build-up and smearing other items. Remove the material carefully
to avoid scratching the surface.
