lbx H20 Series, Руководство пользователя

Страница: 13 / 48

13
•
Before using any other cleaning or decontamination methods, the user must verify with the
manufacturer that the method will not harm the equipment. Wear the proper protective gloves
during cleaning of the instrument.
Note:
•
The electronic device cannot be
cleaned with cleanser.
•
If maintenance service is needed, the
equipment must be cleaned to avoid
contamination
from hazardous
substances and shipped in its original
packing carton.
•
If the instrument will not be used in a
long time, please power OFF and place
in a dry, clean, and stable location at
room temperature.
11. Associated Standards and Regulations
Construction in accordance with the following
safety standards:
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1)
EN 61010-2-10
Construction in accordance with the following
EMC standards:
EN 61326-1
Associated EU guidelines:
EMC-guidelines: 2004/108/CE
Instrument guidelines: 73/023/EWG
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.