LBS DRAGON POWER 3 Скачать руководство пользователя страница 9

Страница: 9 / 62

1Safety Description

User Manual

www.lbspower.com

The UPS is class C3 device. If it is used in residential purpose, it may cause wireless interference. User

should take actions to avoid the interference.

⚫

No liquid or other objects are allowed to enter the UPS.

⚫

UPS must be well grounded.

⚫

In case of fire, please use dry power fire extinguisher. If using liquid fire extinguisher, it may cause

electric shock.

1.1.2 Use Announcements for Battery

Please use specified battery. Non-specified battery will damage the UPS.

⚫

Only authorized professional can replace battery. Do not wear conductive objects, such as watches,

bracelets and rings during operating. Wear rubber shoes and gloves and use tools with insulated

handle.

⚫

Don't put tools or other conductive objects on the battery.

⚫

It is prohibited to short the positive pole and negative pole of the battery or connect them reversely,

which is to avoid fire or electric shock.

⚫

Before connecting or disconnecting the battery terminals, disconnect charger first.

⚫

The battery must be with the same type, model and manufacturer.

⚫

Battery should be kept away from fire source or other electrical equipments that may easily cause

spark to avoid human injury.

⚫

Don't open or destroy the battery. The electrolyte in the battery includes some dangerous objects,

such as strong acid, which will be harmful to skin and eyes. If it is careless to touch the electrolyte,

clean it by a lot of water immediately and then check it in the hospital.

⚫

The waste battery should be disposed according to the local regulations.

Содержание DRAGON POWER 3































































Результаты поиска

Содержание DRAGON POWER 3

Отзывы:

LBS DRAGON POWER 3, Руководство пользователя, Страница: 9 / 62

Результаты поиска

Содержание DRAGON POWER 3

Отзывы: