Operation
Making a Call Using the
Summit Conference
Phone
1 Press the ON/OFF button and
listen for dial tone.
2 Dial the required number on
the keypad (when connected to
an extension of a PABX,
remember to include any line
access digit required).
3 When the other party answers,
you may conduct a conversation
using the built-in microphone.
4 When you have finished the
call, press the ON/OFF button
again.
Receive Volume
You may adjust the volume of
receive speech, by pressing the
UP and DOWN buttons. When
you have reached the maximum
or minimum positions, the unit
will beep 3 times.
As this beep may be quite loud
over the telephone line, it is
recommended that you advise
the other party before adjusting
the volume.
Note : With the volume in the
minimum position, the incoming
speech will be very quiet. This
position may be useful if you
wish
to include a non active party in
your call i.e. you would like
another partly to listen in to a
conversation or discussion you
are having, but not be able to
take part in it.
Mute
The Summits microphone(s) may
be turned off, by pressing the
Mute button. This will still allow
you to hear the other party but
they will not be able to hear you.
Press the Mute button again to
return to normal conversation.
Note : If you have installed the
optional extension microphone,
this will also be muted.
To Answer an Incoming
Call
Calls may be answered on the
Summit conference phone by
pressing the ON / Off button, (the
Mute and Volume buttons will
work in the normal way).
The ON / OFF button should be
pressed again when the call is
completed.
