Lazer Safe PCSS-F Series, Техническое руководство

Страница: 40 / 44

PCSS-F Additions Technical Manual LS-CS-M-023
Page 4-30
Original Language Version: 1.02 Released: 03/12/2013
4.5.2 Down Switch Option 6 - Four Operator Foot Control Only
X03
X04
X05
X06
X07
FIO04
–
CN4
1
2
3
4
5
X08
6
X09
7
Y06
8
0VDC
9
Y07
0VDC
P03
10
11
12
P04
13
24VDC
14
Foot Pedal – Down 1
Foot Pedal – Down 2
X34
X35
X36
X37
P34
FIO04
–
CN9
1
2
3
4
5
P35
6
P36
7
P37
8
24VDC
9
0VDC
10
X38
X39
X40
X41
Y08
FIO04
–
CN10
1
2
3
4
5
Y09
6
24VDC
7
0VDC
8
0VDC
9
Foot Pedal – Down 3
Foot Pedal – Down 4
Figure 4-28: Four Operator Foot Control (CN4, CN9 & CN10- FIO04 Connections)
The connections in this option allow four operator stations with foot pedal control on each as
shown in
Figure 4-28
for the FIO04 module. In this application both the normally open (NO)
and normally closed (NC) contacts from the foot pedal switches on each of the operator
stations are monitored. The NO contacts are monitored using standard inputs, while the NC
contacts are monitored using safety inputs.
This option provides selection for any two of the four available operator stations with either the
1 Foot - 1 Foot operator mode on one of the stations selected or 2 Foot - 2 Foot on two
stations. For any station mode the CNC must provide information on which station is selected
to initiate down movement
, using the Hand Foot Option variable in
ker__e1
(channel 14).