21
7.
O P E R A T I N G T H E L A - Z - B O Y
REMOTE (LR)
Normal Operation
7.1. Once you have setup up the LR for your A/V
equipment, it works like your original remote
controls. To operate, just aim it at your equipment,
press an appropriate device mode key and invoke
the desired function by pressing a corresponding
key on your LR. The keypad will illuminate and
you will hear a beep tone as confirmation of key
touch.
7.2. Use the shift button when attempting to access
additional auxiliary devices or when attempting to
access secondary functions. Please refer to the Key
Function Description.
SHIFT mode will be deactivated after the desired
key is released.
7.3. If your LR is moved the built in touch sensitive
keypad will illuminate.
7.4. The backlit keypad of the LR will be OFF if no key
is pressed and no motion is detected for 8 seconds.
7.5. Your LR controls up to 16 devices. Press each
device key directly to select first 8 (e.g. TV, red
device key indicator will light up). Press SHIFT
key and then device key to select another 8 (from
AUX 1-8, the green device key indicator will light
up).
7.6. To enable / disable the key tones sound, press and
hold "
" and " " keys on the remote
simultaneously for 2 seconds until the device
indicators flashes. If it flashes once, the "beep"
sound is enabled, if it flashes twice, the "beep"
sound is muted.
22
8.
PUNCH THROUGH
You can activate certain functions like TV volume to be
operated in other modes such as SAT. This is referred to
as punch through. Please refer to the following
procedure for activating this function.
8.1. To activate the Punch through Channel setting:
8.1.1. Press and hold "
" and "
VOLUME-
"
keys on the remote simultaneously for 2 seconds
until the upper 4 red device mode indicators light
up (TV, DVD, SAT, VCR) The lower clear
function keys will also be lit and you will hear 2
beep tones.
8.1.2. Enter the punch through code "1", "1", "1", "0".
The upper 4 red device mode indicators (TV, DVD,
SAT, VCR) will flash once and then stay lit
continuously. The lower clear function keys will
also be lit.
8.1.3. Press desired device mode key. (e.g. TV)
8.1.4. Press "
" key.
8.1.5. Press desired channel code device mode key (e.g.
SAT).
8.1.6. The upper 4 red device indicators will flash
twice
and setting punch through mode will exit if the
setting is activated.
8.1.7. Example: SAT channel is activated on TV mode.
8.2. To deactivate the Punch through Channel
setting:
8.2.1. Press and hold "
" and "
VOLUME-
"
keys on the remote simultaneously for 2 seconds
until the upper 4 red device mode indicators light
up (TV, DVD, SAT, VCR) The lower clear
function keys will also be lit and you will hear 2
beep tones.
8.2.2. Enter the punch through code "1", "1", "1", "0".
The upper 4 red device mode indicators (TV, DVD,
SAT, VCR) will light up. The lower clear function
keys will also be lit.
8.2.3. Press desired device mode key. (e.g. TV)
