background image

Comfort. It's what we do.

Touch Sensitive Remote Control

Model LZ6220

16 Function Universal Remote Control 

With Touch Sensitive Keypad

Installation Guide

TM

ECP will repair or replace the defective parts and return 
them at ECP's cost by a shipping method selected by 
ECP.  When contacting ECP to obtain an RMA, 
Purchaser may request expedited return shipping at 
Purchaser's cost.

THIS WARRANTY IS NOT TRANSFERABLE, AND, 
TO THE MAXIMUM EXTENT PERMITTED BY 
APPLICABLE LAW, IS IN LIEU OF ALL OTHER 
WA R R A N T I E S ,   R E P R E S E N T AT I O N S   A N D  
C O N D I T I O N S ,   E X P R E S S   O R   I M P L I E D ,  
STATUTORY OR OTHERWISE, INCLUDING BUT 
NOT LIMITED TO THE IMPLIED WARRANTIES OF 
M E R C H A N T A B I L I T Y  A N D   F I T N E S S   F O R  A  
PARTICULAR PURPOSE.  NO OTHER PERSON OR 
REPRESENTATIVE IS AUTHORIZED TO MAKE 
ANY OTHER WARRANTY ON BEHALF OF ECP OR 
ASSUME FOR ECP ANY OTHER LIABILITY IN 
C O N N E C T I O N   W I T H   T H E   S A L E   O F   T H I S  
PRODUCT.  IN NO EVENT WILL ECP BE LIABLE 
FOR ANY DAMAGES, INCLUDING BUT NOT 
L I M I T E D   T O   I N C I D E N TA L ,   S P E C I A L   O R  
CONSEQUENTIAL DAMAGES ARISING OUT OF 
THE USE OR INABILITY TO USE THE PRODUCT, 
I N C L U D I N G   D A M A G E S   D U E   T O   E C P ' S  
NEGLIGENCE.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, AND YOU MAY ALSO HAVE OTHER 
RIGHTS WHICH VARY FROM STATE TO STATE 
AND COUNTRY TO COUNTRY.

©

La-Z-Boy is a Trademark of La-Z-Boy Incorporated and 
is used under license to 

Elexa Consumer Products, Inc. 

 

2008

6200 N. Hiawatha Ave, 8th Floor Chicago, IL 60646

31

95 x 190mm

Содержание LZ6220

















Отзывы: