Page 5 of 6
Step2: Attach the T-Rocker (D) to seat frame and back (A), make sure the holes in steel spring plate
are completely aligned with the holes in “U” bar of the seat frame (A) as shown in figure 2 expanded
view. Fix with M8x40mm hex head bolt (H), steel plate (N), M8 spring washer (J), and M8 nut (K)
using hex wrench (O). (See Figure 2)
Figure 2
Step3: Tighten all bolts and nuts with hex wrenches (O). Do not over tighten. Cover all M6 bolts
(F)&(G) with M6 bolt caps (L), M8 bolts (H) with M8 bolt caps (M),.
Step4: Insert the seat frame into base (E). Make sure the seat bottoms out in the base for safety.
See Figure 3.
Expanded View
